Your are here: EX01 MiniStation - 1W Stereo

EX01 MiniStation

Panels

Internal overview

EX01 LCD panel

Power Output & Tecnical Features

Large image

RF Power Output

Technical Features:

RF features:

Output Power: 1W +/- 5% variation across the band
RF Output Impedance: 50 Ohms
RF Output connector: BNC Female
Frequency Range: 76,0 to 98MHz and 87,5 to 108,1MHz
Frequency Step: Default 100KHz, selectable for 200kHz or others under request
Frequency Programmability: UP/DOWN Keys, safety hold programmable on the front panel
Frequency Stability: 5 ppm, 2 or 1 ppm under request
Type of Modulation: F3, FM direct modulation (RF oscillator directly on the frequency)
Harmonic and Spurious Attenuation: >80dBc
Residual AM modulation (Assyncr.) Approximately 0,05% (55dB)
Residual AM modulation (Syncr.) Approximately 0,1% (65dB)
Intermodulation Distortion: <0,05% @ 1kHz
Frequency Response Capability: 20Hz to 200kHz

Power Supply:

AC input: Universal Full-Range 85 to 265VAC 47 to 63Hz
DC Input: +15V 1A DC
AC Surge protection: 1 Varistor 285V and fuse
Power Supply Efficiency: 85% or better in 220V AC
Switching frequency: 100kHz
Power Consumption: Approximately 2W from AC
AC Input Connector: CS8 connector

General features:

Weight: 460grs net weight
Dimensions: 178mm (6”) wide, 44,45mm (1,5”) high, 100mm (4”) deep
Ambient temperature range: 0 to +45 Degrees Celsius
Maximum humidity: 95% at +45ºC without condensation

CPU and Display features:

CPU: PIC Processor, microcontrolled with Sinteck Ex01 Software V.1.0
Memory: Nonvolatile, retention > 40 years
Full micro-controlled Protections: PLL out of lock, VSWR excedeed
Panel Keys Control: UP/DOWN freq. St or Mono, Int or Ext MPX, Config Hold
LCD Display: 16 colums, 2 lines, green back light

Audio Inputs Left&Right:

Input Connectors: RCA Female
Internal Jumper selection for: 50 or 75us stereo pre-emphasis
Input Impedance: 10k Ohms umbalanced
Frequency Response: 20Hz to 15kHz (THD+N < 0,1%)
Input Level: 0dB for 75KHz carrier deviation
Stereo Separation: Better than 45dB @ 1kHz
Pilot Tone Frequency/Stability: 19kHz +/- 1Hz

MPX input:

Input Impedance: 10k Ohms Unbalanced BNC Connector
Frequency Response: 20Hz to 200KHz +/- 1dB for 75kHz deviation

*Specification subject to change without notice

Sinteck | Privacy Policy | Terms of use
Copyright 2007 Sinteck, All Right Reserved